Blog
Sealing Material Temperature Guide
Operating temperature is one of the most important factors when selecting the appropriate sealing material. Operating outside the recommended temperature range can lead to hardening, cracking, loss of elasticity, and premature seal failure.
Indicative Operating Temperature Ranges
| Material | Typical Operating Temperature Range |
|---|---|
| NBR | -30°C to +100°C |
| HNBR | -30°C to +150°C |
| EPDM | -45°C to +150°C |
| FKM (Viton®) | -20°C to +200°C |
| VMQ (Silicone) | -60°C to +200°C |
| FVMQ | -60°C to +200°C |
| PTFE | -200°C to +260°C |
| PU (Polyurethane) | -35°C to +110°C |
| POM | -40°C to +100°C |
| PEEK | Up to +250°C |
Important Note
The temperature values shown above are indicative only. The actual performance and temperature resistance of each sealing material depend on several factors, including:
- The operating medium
- System pressure
- Operating speed
- Service duration
- The specific material formulation used by each manufacturer
Selecting the appropriate sealing material should not be based solely on operating temperature, but also on the overall operating conditions of the application.
For technical guidance in selecting the most suitable sealing material for your application, the Sealpoint team is always available to assist you.
